卧式双冷双热后踵定型机 可做成型后再定型 horizontal double cold dusl hot heel forming machine do the forming and shaping

1.双冷双热模组，产能大，生产效率高。
2.热内外模温度可个别调整，可试用各种不同材料材质之鞋面与内里的加温需求。
3.经预定型后之鞋后踵，衬套完全与鞋面几内里粘合，不易脱离及内里完全拉平，提高鞋面品质，减少不良率。
4.斜面机台设计操作简单又方便。
5.夹具可做行程调整或选择不用，适用各种不同鞋型。
6.模具依客户鞋型，可获最准确定型效果。
7.特殊反面模可做不良品之再定型，消除皱纹及增加鞋口之美观。
8.环保之冷冻系统独特设计，效率高，冷却速度最快，正常运转10分钟内蒸发器可达20℃以上。
9.采用微电脑控制，温度更准确，操作更方便。

1.Two cooler and heater setsare with high productivity and efficiency.

2.The temperature of theinner and outer hot-die can be adjusted individually. It suits forthe heating requirements of upper and liner made from differentmaterials.

3.After molding the heel,the liner is leveled and sticks to the upper intensely. In thisway, they are not separated easily. It can also improve the quality anddecrease the failure rate.

4.The design of the machineis simple and convenient.

5.The fixtures can be usedfor adjusting the stroke and it suits for all kinds of shoes.

6.We make die according tothe customers’requirement to acquire the most accurateeffect. 

7.The special opposite diecan reshape the defective products, eliminate the wrinkles andincrease the beauty of the shoes.

8.The design of theenvironmental cooling system is unique with high efficiency、fast freezing speed. The temperature of the evaporator can reach above20 degree within 10 minutes.

9.It is controlled bymicrocomputer to get more accurate temperature and convenientoperation.

 机械尺寸（长x宽x高)：850*1050*1350(mm)

  产量：1400-2000PARIS/8小时

  重量：320kg

  电压：220V-50/60HZ

  功率：2.5KW