立式双冷双热后踵定型机 半气袋式 Vertical Heel Molding Machine with Two cooler and Heater Half Air Bag Type

1、本机冷模上模使用气压空气皮套，不需时常换模，下模使用单一螺丝，固定换装迅速，增进产量，降低制模成本。
2、热模上模采用耐高温硅胶，单独温控加速后套活化，铝模可自行调整温度，适用各种采制，如果要最佳定型效果，定型模均照客户指定鞋楦尺寸定制。
3、本机备用焦灯及多功能夹具，冷冻定型温度达到零下30℃-40℃，配合鞋面与鞋模帖楦定型。

  1.The upper cool-die adoptsthe pneumatic boot,so you don’t need to change the moldfrequently.The latter mold uses single screw to replace rapidly、increase productivity and lower the cost of making  mold.

2.The upper hot-die adoptsthe high-temperature resistant silica.After controllingtemperature and reactivating,the Aluminum mold can adjust the temperatureitself and suits for all materials.In order to get the best moldingeffect,we make the machine according to customers’ requirements.

3.The machine is with focuslight and multi-functional fixtures.The temperature of freezingand molding attains below 30-40 degree,helping to mold theupper and lasting.

 机械尺寸（长x宽x高)：1300*900*1980(mm)

  产量：1500-2000PARIS/8小时

  重量：500kg

  电压：220V

  功率：2.6KW